The JOYO Preamp House delivers 9 classic guitar amp preamps in one pedal! Turn the dial to select the amp simulation and you can switch from a vintage fendery clean to a dirty Mesa-ry drive, 9 different amps & 2 channels. We dropped in a built in Impulse R
The JOYO Preamp House delivers 9 classic guitar amp preamps in one pedal!
Turn the dial to select the amp simulation and you can switch from a vintage fendery clean to a dirty Mesa-ry drive, 9 different amps & 2 channels.
We dropped in a built in Impulse Response loaded 4 x 12 cab simulation with 3 controls to turn it off or switch it between the 6.35 out or the balanced XLR output. The Headphone out uses the cab simulation all the time.
Each preamp has 2 channels, clean / distortion and allows you to save your settings on both channels for all amps. Select between the 2 amp settings Clean orDistortionusing the A & B footswitch, pressing both together will give you Bypass mode.
Select from the following Guitar PreAmp Simulations:
F 65 TwinReverb
M JCM 900
V AC 30
MB LONESTAR
MB DUAL RECTIFIER
EVH 5150
ENG POWERBALL
OR TH 200
OR BE 100
The guitar pedal has a built in FX LOOP interface for external FX pedals so you can position your modulation, delay, reverb and Eq as you would with your classic head.
The JOYO Preamp House is a user friendly tone solution, the design is a result of 10 years of our best selling amp simulator guitar effect pedals. The JOYO AmpHouse transforms those classic & vintage guitar amp tones we crave straight onto your board and into your ears, without the expensive amp !
JOYO Amp Simulators can be used as a DI (Direct Interface) directly into a mixing console, audio recording interface, or in front of a clean amp for a tonal drive, pushing your existing amp to a whole new level.
Control
XLR Output
9 Position Amp Selector
Gain
Cab Sim toggle
Treble
Master Guitar Volume
Lift Switch
Footswitch A Clean
Footswitch BDistortion
Mono Input / Output
Headphone output
USB for firmware updates.
Groovy Ambient Lighting
Specs
Dimensions: 130mm * 110mm * 50 mm
Weight:450g
Input Impedance: 1M
Output Impedance: 600
XLR Output Impedance: 600
Sample Rate 44.1l
Sample Resolution : 24bit
Rated Current Consumption: 320mA
DelayTime: about 500ms
Working Voltage: DC 9V (center minus)
Cost - $25
Free Shipping We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.
Delivery Time It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.
Reviews
There are no reviews yet.